4
.COM
5. Installation
A
. Intel Socket Installation
( Go to Page 8 For AMD Sockets)
1) Intel Socket 2011 Installation
Partially unscrew the four bolts located on the base of the CPU cooler. Then,
insert the Intel Clips between the base and the heatpipe cover, with the clips
bent away from the heatsink.
Insert
Key
Intel Clip
Apply thermal grease just enough to thinly cover the CPU surface. Then, insert four Silver
Bolts (type A) through the outermost Intel Clip holes, and using the 3/32” Allen Wrench,
fasten the Silver Bolts incrementally while alternating between them.
Please make sure to use the
Bolts with correct color and
thread length as they can
appear quite similar.
Gold Bolts
(Socket LGA 1366)
Sliver Bolts A (4mm)
(Socket LGA 2011)
Sliver Bolts B (3mm)
(Socket AMD/LGA1156/
1155/775/)
Sliver Bolt A
(4mm)
Allen Wrench
Caution
Base
Heatpipe cover
The holes in the Clip (as shown below) are
matched to the “keys” on the heatpipe cover
for secure Clip installation.
