background image

5.1 Reserator Placement

The Reserator

s

placement

should be determined in relation

to the position of the PC. Place it

upright, next to or slightly above

the PC. Note that if the Reserator

is placed lower than the PC, the

PVC Tube

s internal air pressure

may prevent proper initial

operation. 

5.2  Adding Coolant

1) Remove the Reserator XT

s Reservoir Cap by

turning it counter-clockwise. 

2) Mix the provided coolant with one liter of distilled

water in a bowl.

3) The entry hole is small. Therefore, use the

provided coolant container to fill the Reserator

with mixed coolant (four separate pours for a

sum of 1000

).

Note 1) Fill by four separate pours to prevent overflowing

of coolant. Once air has been completely

released and the coolant begins to circulate, then

refill the remaining coolant (250

).

Note 2) The provided coolant is a concentrated liquid.

Therefore, it must be diluted with distilled water in

a 1:4 ratio.

Note 3) Read the warning label on the coolant before

use. 

Note 4) Keep this product and its associated system

away from children. 

5. Installation Guide

RESERATOR  XT

RESERATOR  XT

1) Reserator XT- 1 Unit 

English

6) PVC Tube - 4m

7) I/O Bracket - 1EA

8) Degassing Tube - 1EA

9) Tube Clamp - 2EA

10) User

s Manual - 1EA

2) CPU Water Block (ZM-WB5) - 1SET

3) DC Cable - 1EA

4) Jump Cable - 1EA

5) Coolant (ZM-G300) -  1EA

4. Components

7

The specifications of this product and its components may change without prior notice to improve performance.

8

The specifications of this product and its components may change without prior notice to improve performance.

Summary of Contents for Reserator XT











Reviews: