www.zalman.co.kr www.zalmanusa.com 31
TNN 500A
English
2. In order to properly apply the thermal grease and determine the proper location for the CPU heatpipes, the Case
Block Bases on the Right Heatsink Plate must be removed. Unscrew the Case Block Base fastening bolts
located on top of the bases (FH M3X6) counterclockwise by one turn, and completely unscrew the Case Block
Base fastening bolts located on the Right Heatsink Plate (PH M3X7) so the Case Block Bases can be moved to
the left and right and the CPU Heatpipes can be fitted properly. Apply thermal grease to the bottom of each of the
Case Block Bases, and using the Case Block Base fastening bolts for the Top Plate (FH M3X16) and those for the
Right Heatsink Plate (PH M3X7), reinstall the Case Blocks.
Note)
The bottoms of the Case Block Bases, except for the one for the Top Plate, do not initially have thermal
grease applied thereon.
Case Block Base
CPU Block Base
CPU Heatpipe
Case Block Cover
Case Block Base
Bolt(FH M3X16)
Top Plate
Bolts(PH M3X7)
Appropriately position the Case Blocks Installation Holes for installing Case Blocks
in various positions
Thermal Grease
Case Block Base
