www.zalman.co.kr www.zalmanusa.com 35
TNN 500A
English
2. Remove the stock cooler on the graphics card and spread the thermal grease thinly onto the exposed
GPU (VPU).
Note)
1) Clean off the contact surfaces of the GPU (or VPU, Video Chipset) and the VGA Block Base
thoroughly.
2) When spreading the thermal grease thinly onto the GPU (VPU), a piece of cardboard paper can
be used to aid in spreading. (Most GPUs (VPUs) located on the video card have a concave
surface and need more thermal grease at the center.GPUs (VPUs) with a protective frame for
the core especially need to have a lot of thermal grease applied.)
3. Check the holes around the core and choose the right VGA Block Base for Assembly.
Note)
This product has VGA Block Bases of two (2) different sizes. If your video card is based on the
GeForce4 Ti or your video card has heatsink mounting holes that are spaced far apart, it is
necessary for you to use VGA Block Base B. Otherwise, use VGA Block Base A. (The difference
between VGA Block Base A and B is that A is shorter than B.)
Thermal Grease
GPU (VPU)
Graphics Core
Protective Frame for Core
<When Protective Frame for
Core is Present>
VGA Block Base Assembly A
VGA Block Base Assembly B
