1
.COM
1. Precautions
2. Specifications
Model
Spec.
VF3000F
Material
Heatsink Fins
Pure Aluminum
Base
Pure Copper
Heatpipe
Pure Copper
Weight
430g
Dimensions
239(L)
×
98(W)
×
51(H)
㎜
Fan
Bearing Type
EBR Bearing
Dimension
92(L)
Ⅹ
92(W)
Ⅹ
15(H)
㎜
RPM [Fan Mate 2]
1400 ~ 3000 rpm
±
15%
Noise Level [Fan Mate 2]
18 ~ 33 dBA
±
15%
1) This cooler is specifically optimized and designed for reference VGA cards
NVIDIA GeForce GTX465, GTX470, GTX480.
2) By installing this product on a VGA (Video Graphics Array) card, two PCI
slots immediately below the PCIe (or AGP) slot occupied by the VF3000F
will become unusable.
3) If this product is to be installed on a recently released VGA card, please
check for compatibility at Zalman
’
s website first.
4) If the VGA card and/or its components interfere with the installation of this
product, then stop the installation, refer to the list of compatible VGA cards
or motherboards at Zalman
’
s website, and install this product with one of
the compatible VGA cards or motherboards.
5) Do not ingest the Thermal Grease, and avoid its contact with skin and
eyes. If contact is made with skin, wash off with water. If ingested or any
irritation persists, seek medical attention.
6) To prevent possible injuries, gloves must be worn while handling this
product.
7) Excessive force exerted on the fan may cause damage to the fan and/or
system.
8) Please keep out of reach of children.
9) Check the components list and condition of the product before installation.
If any problem is found, contact the retailer to obtain a replacement.
10) During transportation of the system, the cooler must be removed. Zalman
is not responsible for any damages that occur during the transport of a
system.
11) Product design and specifications may be revised to improve quality and
performance.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due
to external causes, including but not limited to, improper use,
problems with electrical power, accident, neglect, alteration,
repair, improper installation, or improper testing.
