PROGRAM VIEWING
PROGRAM SETTING
PROGRAM CANCEL / RESTORE
- dde
fi
ning ON-times and OFF-times for the given week’s days, for the given pro-
grams running in the automatic mode; enter edition by pressing OK; the programs are
numbered as (ON / OFF) pair ( /
). Maximum number of /
programs is 100 pairs
per channel;
With
cursors select
or
;
With
cursors select the program (e.g.
) for its parameters editing and enter
edition by pressing OK;
HOUR - with
cursors select an hour and acknowledge by pressing OK;
MINUTE - with
cursors select minutes and acknowledge by pressing OK;
WEEK’S DAY - with
ursors select the week’s day when the given program is to be active
(there are 16 week divinsion combinations available), acknowledge selection by pressing
OK - the program will be saved;
The next saved program will be displayed (e.g.
) - press OK to enter edition, in
order to select the other program use the cursors
, in order to exit the mode press
or ;
The last available program is
.
PROGRAM VIEWING - viewing settings for the switching programs ( /
) i.e. hours,
minutes and week’s days; enter viewing by pressing OK;
With
cursors select
or
;
In order to scroll programs press successively the cursors
; cursor increases program
number; cursor decreases program number;
The programs are numbered in the form of ( /
), pairs, where each program may be
treated independently; there are 400 programs (100 /
pairs per channel).
It is possible to exit every submenu window in any moment without saving settings by
pressing the button or .
PROGRAM CANCEL / RESTORE - the option is used during program setting and viewing
for program cancelling (inactivation) and restoring; enter by pressing OK;
With
cursors select
or
;
With
cursors select the program to be cancelled / restored;
Press and hold OK for 3 seconds – if the program is active, it will be canceled (inactivated)
and will not be checked during the timer operating in the automatic mode (however it will be
saved in the storage and it will be possible to restore the program); horizontal lines will be
displayed;
If the program is cancelled, it will be restored by pressing OK and its edition will be possible
, pressing and holding OK for 3 seconds will cause the program restoring without time
edition possibility .
Week division combinations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
EXTERNAL INPUT SETTING
IMPULSE PROGRAM SETTING
RANDOM MODE SETTING
- the impulse generating mode and impulse duration time setting; the impulse mode current state is shown in the display (
- ON,
- OFF); enter
edition by pressing OK;
With
cursors select
or
;
With the cursors
select one of the following options
- ON or
- OFF for the impulse mode; acknowledge selection by pressing OK; in case of the
state selecting the impulse mode main window will be open;
After selecting
option with
cursors select impulse duration time in seconds; acknowledge selection by pressing OK;
After the selection acknowledgement the impulse mode setting window is open. In the impulse mode there are only ON programs.
- setting maximum ON and OFF time for the relay in the random mode which is
the same for both channels, but switched ON separately; enter the mode by pressing
OK; with the cursors
select demanded window, where:
- the relay maximum ON-time setting in minutes - the time will be randomized for
the time range between 1 minute and
minutes;
- the relay maximum OFF-time setting in minutes - the time will be randomized
for the time range between 1 minute and
minutes;
Window : press OK to enter; with
cursors set maximum ON-time (in minutes),
acknowledge by pressing OK; you will enter window .
Window : press OK to enter; with
cursors set maximum OFF-time (in minutes),
acknowledge by pressing OK; you will enter window .
It is possible to exit every submenu window in any moment without saving settings
by pressing the button or .
- setting the unit mode after the IN external input triggering; the module remains
in the state until the triggering IN signal decays; enter edition by pressing OK;
With
cursors select
or
;
After the channel selection with
cursors select an appropriate external input mode,
where:
- external input function is OFF;
- manual mode with the continuous relay OFF-state;
- manual mode with the continuous relay ON-state;
- automatic mode, the relay switching ON / OFF according to the set programs;
- random mode according to settings from the menu RANDOM MODE SETTING;
Acknowledge the given mode selection by pressing OK; after acknowledgement the external input setting window will be open.
It is possible to exit every submenu window in any moment without saving settings by pressing the button or .
5m
7m
3m
4m
8m
1m
2m
3m
3m
1m
2m
1m
4m
t
11 14
11 14
MAIN RESET
CONNECTION
MOUNTING
ADVANTAGES
Intelligent calendar
- the programmer is
fi
tted with a built-in calendar which
fi
ts leap
years automatically, disables entering incorrect dates, calculates a week’s day on the
basis of the current date and
fi
ts the summer / winter time change.
General purpose external input
- the programmer is
fi
tted with an external input
that enables the operating mode change without operating a switchboard, e.g. by
means of a remote push button.
Programmable random mode
- it is possible to set beginning and ending time, and
the day of the random mode activity. Additionally, it is possible to program maximum
ON and OFF times in dependence of user’s needs.
Additional impulse mode
- it is possible to switch the timer into the impulse mode
which gives control units new capabilities.
DIMENSIONS
PRODUCT FAMILY
ZCM-12 Programmer belongs to ZCM
family of products.
1. Disconnect power supply by the phase
fuse, the circuit-breaker or the switch-
disconnector combined to the proper
circuit.
2. Check if there is no voltage on con-
nection cables by means of a special
measure equipment.
3. Install the ZCM-12 on the TH 35 DIN
rail in the switchboard.
4. Connect the cables with the terminals in
accordance with the installing diagram.
5. Switch on the power supply from the
mains.
WARRANTY CARD
INNER DIAGRAM
RELAY CAPACITY
A2
A1
IN
μ
C
KLAW.
LCD
RTC
ZAS.
L(+)
L(+) / N(-)
N(-)
In order to cancel the clock sys-
tem (time, date, activity of given
functions etc.) you should hold
buttons ( and ) simultaneously
in the main menu for
3 sec
;
All the display
fi
elds will light up;
After a while, the clock will auto-
matically set date and time.
Attention: In order to restore factory settings, you should additionally hold button OK
Salesman stamp and signature, date of sale
There is 24 months guarantee on the product
1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modi
fi
cations made by the PURCHASER or any third parties to the product or any other devices
needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer.
3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.
4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.
5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty.
Programmer type:
11 - week (1 channel)
12 - week (2 channel)
21 - year
31 - astronomical
Device type
Power supply:
ZCM-xx -
230 V AC
ZCM-xx/U - 24 ÷ 250 VAC
30 ÷ 300 V DC
