69
Electronic programmer
4
5
1
2
3
6
7
8
FO 2571
Fig. 5
1.
Push button for selecting a function
2.
Decreasing control button
3.
Increasing control button
4.
Display
5.
Cooking Duration pilot lamp
6.
End of cooking pilot lamp
7.
Minute minder pilot lamp
8.
Time of day pilot lamp
The oven will work only if the time of day has
been set.
Moreover, the oven can also be operated
without any programme.
Setting the time of day
When the power supply is switched on, or after a power
failure, the Time of day pilot lamp will flash on the
display.
To set the correct time of day:
1.
press button or .
2.
After the setting is carried out, wait for 5 seconds: the
Time of day pilot lamp will go out and the display
will show the set time. The appliance is ready for use.
To reset the correct time of day:
1.
press button
repeatedly to select the Time of day
function. The relevant pilot lamp will start flashing. Then
proceed as described above.
The time of day may be reset only if no automatic
function (cook duration
or end of cooking
)
has been set.
Cooking Duration function
Thanks to this function, the oven will automatically switch
off at the end of a programmed cooking duration time.
Place food in the oven, select a cooking function and
adjust the cooking temperature. Press button
repeatedly
to select the Cooking Duration function. The relevant pilot
