70
lamp will start flashing. Then, proceed as follows:
To set the duration time:
1.
press button or .
2.
After the setting is carried out, wait for 5 seconds: the
"Cooking Duration" pilot lamp will come on and the
display will revert to the time of day.
3.
When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
while the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.
NOTE:
when doing this operation, the oven will be
operated again, therefore, remember to turn the oven
function and the thermostat control knob to zero at the
end of the cooking time.
To cancel the duration time:
1.
Press button
repeatedly to select the Cooking
Duration function. The relevant pilot lamp will flash
and the display will show the remaining cooking time.
2.
Press button until the display shows 0:00. After
5 seconds the pilot lamp will go out and the display will
revert to the time of day.
End of cooking function
Thanks to this function, you can set the oven to switch off
automatically when a programmed end of cooking time is
over. Place food in the oven, select a cooking function and
adjust the cooking temperature. Press button
repeatedly
to select the End of cooking function. The relevant pilot
lamp will start flashing. Then, proceed as follows:
To set the End of cooking time:
1.
press button or .
2.
After the setting is carried out, wait for 5 seconds: the
End of cooking pilot lamp will come on and the
display will revert to the time of day.
3.
When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
while the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.
NOTE:
when doing this operation, the oven will be
operated again, therefore, remember to turn the oven
function and the thermostat control knob to zero when
cooking is over.
