Programme
Type of load
Degree of soil
Programme phases
•
Crockery
•
Cutlery
•
Fresh
•
Wash 50 °C
•
Intermediate rinse
•
Final rinse 50 °C
•
AirDry
2)
•
All types of loads
•
All degrees of soil
•
Prewash
1) This is the longest programme offering the most efficient use of energy and water consumption for crockery and cutlery
with normal soil. This is the standard programme for test institutes. This programme is used to assess compliance with the
Ecodesign Comission Regulation (EU) 2019/2022.
2) This is a programme for rinsing off food remains from the dishes. It prevents odours forming in the appliance. Do not use
detergent with this programme.
Consumption values
Programme 1)
Water
(l)
Energy
(kWh)
Duration
(min)
9.9
1.0392)/1.0363)
2272)/2273)
11.1 - 13.6
1.052 - 1.285
160
9.6 - 11.7
0.886 - 1.083
90
9.2 - 11.2
0.556 - 0.680
30
3.4 - 4.2
0.012 - 0.015
15
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes
can change the values.
2) In accordance with the 1016/2010 regulation
3) In accordance with the 2019/2022 regulation
Information for test institutes
To receive the necessary information for conducting
performance tests (e.g. according to EN60436), send an
email to:
info.test@dishwasher-production.com
In your request please include the product number code
(PNC) found on the rating plate.
For any other questions regarding your dishwasher
please refer to the service book provided with your
appliance.
Settings
Programme selection mode and user mode
When the appliance is in programme selection mode it
is possible to set a programme and to enter user mode.
Settings available in the user mode:
• The level of water softener according to the water
hardness.
• Activation or deactivation of the acoustic signal for
the end of a programme.
• Activation or deactivation of the AirDry.
As the appliance stores the saved settings, there is
no need to configure it before every cycle.
26