Step 5
Turn the fasteners by 90° and remove
them from their seats.
Step 6
First lift carefully and then remove the
glass panel.
90°
1
2
Step 7
Clean the glass panels with water and soap. Dry the glass panels carefully. Do not clean the glass panels
in the dishwasher.
Step 8
After cleaning, install the glass panel and the oven door.
When installed correctly the door trim clicks.
Make sure that you install the internal glass panel in
the seats correctly.
A
How to replace: Lamp
Warning! Risk of electric shock.
The lamp can be hot.
Before you replace the lamp:
Step 1
Step 2
Step 3
Turn off the oven. Wait until the
oven is cold.
Disconnect the oven from the
mains.
Put a cloth on the bottom of the cav-
ity.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
Troubleshooting
Warning! Refer to Safety chapters.
What to do if...
In any cases not included in this table please contact
with an Authorised Service Centre.
30
