Temperature regulation
Before regulating the temperature, it is necessary to
select the compartment (fridge or freezer).
The upper or lower cavity is selected by the
compartment selection button (6).
To select the freezer compartment touch the
compartment selection button (6) until LED
corresponding to the upper cavity lights up.
The temperature LED indicator shows the latest set
temperature. Recommended setting is -18°C.
To select the fridge compartment touch the
compartment selection button (6) until LED
corresponding to the lower cavity lights up.
The temperature LED indicator shows the latest set
temperature. Recommended setting is +4°C.
To set temperature:
1. Touch temperature regulator button (7).
Current temperature indicator blinks.
2. Any time you touch the temperature regulator
button (7), the setting moves by one position. When
you select a temperature, the LED corresponding
to selected temperature value blinks for a while and
the setting is fixed.
The set temperature will be reached
within 24 hours. After a power failure the
set temperature remains stored.
FastFreeze function
The FastFreeze function is used to perform pre-freezing
and fast freezing in sequence in the freezer
compartment. This function accelerates the freezing of
fresh food and, at the same time, protects food products
already stored in the freezer compartment from
undesirable warming.
To freeze fresh food activate the
FastFreeze function at least 24 hours
before placing the food to complete pre-
freezing.
To activate FastFreeze function press the FastFreeze
button (7) for 3 seconds. The FastFreeze indicator
switches on.
This function stops automatically after 52
hours.
It is possible to deactivate the function at any time by
pressing FastFreeze button (7) for 3 seconds again.
The FastFreeze indicator switches off.
Door open alarm
If the fridge door is left open for approximately 5
minutes, the fridge compartment indicator flashes and
the sound is on.
During the alarm the sound can be muted by pressing
any button. The sound switches off automatically after
around one hour to avoid disturbing.
The alarm deactivates after closing the door.
Daily use
Positioning the door shelves
To permit storage of food packages of various sizes, the
door shelves can be placed at different heights.
1. Gradually pull the shelf up until it comes free.
2. Reposition as required.
8
