ZANKER KXAK82FR, User Manual

•

Do not store explosive substances such as aerosol cans

with a flammable propellant in this appliance.

•

If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarly

qualified persons in order to avoid a hazard.

2. SAFETY INSTRUCTIONS

2.1 Installation

 WARNING!

Only a qualified person must install this

appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Do not use the appliance before installing

it in the built-in structure due to safety

manner.

• Follow the installation instructions supplied

with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use safety

gloves and enclosed footwear.

• Make sure the air can circulate around the

appliance.

• At first installation or after reversing the

door wait at least 4 hours before

connecting the appliance to the power

supply. This is to allow the oil to flow back

in the compressor.

• Before carrying out any operations on the

appliance (e.g. reversing the door),

remove the plug from the power socket.

• Do not install the appliance close to

radiators or cookers, ovens or hobs.

• Do not expose the appliance to the rain.

• Do not install the appliance where there is

direct sunlight.

• Do not install this appliance in areas that

are too humid or too cold.

• When you move the appliance, lift it by the

front edge to avoid scratching the floor.

2.2 Electrical connection

 WARNING!

Risk of fire and electric shock.

 WARNING!

When positioning the appliance, ensure

the supply cord is not trapped or

damaged.

 WARNING!

Do not use multi-plug adapters and

extension cables.

• The appliance must be earthed.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Make sure not to cause damage to the

electrical components (e.g. mains plug,

mains cable, compressor). Contact the

Authorised Service Centre or an

electrician to change the electrical

components.

• The mains cable must stay below the level

of the mains plug.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

4 ENGLISH