ZANKER KXAK82FR, User Manual

³ the height, width and depth of the appliance

including the handle, plus the space

necessary for free circulation of the cooling

air, plus the space necessary to allow door

opening to the minimum angle permitting

removal of all internal equipment

3.2 Location

To ensure appliance's best functionality, you

should not install the appliance in the nearby

of the heat source (oven, stoves, radiators,

cookers or hobs) or in a place with direct

sunlight. Make sure that air can circulate

freely around the back of the cabinet.
This appliance should be installed in a dry,

well ventilated indoor position.
This appliance is intended to be used at

ambient temperature ranging from 10°C to

38°C.

The correct operation of the appliance

can only be guaranteed within the

specified temperature range.

If you have any doubts regarding where

to install the appliance, please turn to the

vendor, to our customer service or to the

nearest Authorised Service Centre.

It must be possible to disconnect the

appliance from the mains power supply.

The plug must therefore be easily

accessible after installation.

3.3 Electrical connection

• Before plugging in, ensure that the voltage

and frequency shown on the rating plate

correspond to your domestic power

supply.

• The appliance must be earthed. The

power supply cable plug is provided with a

contact for this purpose. If the domestic

power supply socket is not earthed,

connect the appliance to a separate earth

in compliance with current regulations,

consulting a qualified electrician.

• The manufacturer declines all

responsibility if the above safety

precautions are not observed.

• This appliance complies with the E.E.C.

Directives.

3.4 Ventilation requirements

 CAUTION!

Appliance must be installed according to

installation instruction in order to ensure

required ventilation.

3.5 Door reversibility

Please refer to the separate document with

instructions on installation and door reversal.

 CAUTION!

At every stage of reversing the door

protect the floor from scratching with a

durable material.

4. CONTROL PANEL

4.1 Switching on

1. Insert the plug into the wall socket.

2. Turn the temperature regulator clockwise

to a medium setting.

4.2 Switching off

To turn off the appliance, turn the

temperature regulator to the "O" position.

ENGLISH 7