Product description
Cooking surface layout
3
4
5
2
1
1
Semi-rapid burner
2
Triple Crown burner
3
Rapid burner
4
Auxiliary burner
5
Control knobs
Control knobs
Symbol
Description
no gas supply / off posi-
tion
Symbol
Description
ignition position / maxi-
mum gas supply
minimum gas supply
Daily use
Warning!
Refer to the Safety chapters.
Ignition of the burner
Warning!
Be very careful when you use open fire
in kitchen environment. Manufacturer decline any
responsibility in case misuse of the flame
Always light the burner before you put cookware.
To light the burner:
1. Turn the control knob counterclockwise to the
maximum position ( ) and push it down.
2. Keep the control knob pushed for approximately 5
seconds; this will let thermocouple to warm up. If
not, the gas supply will be interrupted.
3. Adjust the flame after it is regular.
If after some tries the burner does not light, check
if the crown and its cap are in correct positions.
A
B
C
D
17
