The furniture door
The door on this appliance is designed for the
overlay of a panel having the following dimensions:
Width
596 cm
Height
644 - 724 mm max
Thickness
20 mm max
Weight
2 - 7.5 kg max
The panel height should be no more than
indicated, otherwise complete opening of the
door will no longer be possible as the panel
hits against the dishwasher plinth.
Mounting the furniture door onto the
door
The height of the panel depends on the height of
adjacent kitchen units (see kitchen plinth
adjustment).
The panel must be fitted with a handle, as the
dishwasher handle will be hidden by the panel. Drill
the panel with a Ø 2 x 12 bit according to the
dimensions indicated in the figure.
Fix cross bar onto the panel using 3.5 x 16 screws
provide.
Mount the decor panel by inserting the two pivots
of the cross-bar into the slotted holes of the door.
Lift the decor panel until perfect alignment with the
fascia panel is obtained.
Once the correct position has been found, open the
door and fasten the decor panel on the lower and
upper section by means of the four 4 x 40 screws
provided, using the holes through the inner door.
48
PFI07GB
II19
*
*
550
30
172
596 max
II11
II56
II55
Summary of Contents for ZKS 5620 I
Page 1: ...Geschirrsp ler ZKS 5620 I Dishwasher Bedienungsanleitung Instruction book...
Page 26: ......
Page 27: ......
