![background image](http://html1.mh-extra.com/html/zantia/hebe/hebe_operating-and-maintenance-handbook_3146358010.webp)
a.7 Ordering spares
Exclusively authorized ZANTIA technical personnel must perform interventions of any entity.
Please refer to the authorized assistance center or to your retailer for possible requests of spares.
a.8 Waste material
Do not drop electrical devices among domestic waste. According to the European Directive 2002/96/CE
regarding electrical and electronic devices’ waste material, and its application in conformity to national
regulations, exhausted electrical devices must be collected separately, in order to be reutilized in an
eco-friendly way.
B. INSTALLATION INSTRUCTIONS
b.1 Initial warnings
The device must be installed on a pavement that presents an adequate burden capacity. If the existing building does not satisfy
this requirement, appropriate measures (for instance a burden distribution plate) must be taken.
The installation of the device must guarantee an easy access to clean the stove, the exhausted gas piping and the flue.
Extraction fans can cause problems, when used in the same room or space of the device.
b.2 Moving and transporting
Make sure that the devised used for lifting and transporting the stove support its weight, which is reported on the identity plate
on the back of the stove. The lifting of the stove is normally performed with an elevation trolley, by inserting the pitchforks in the
proper slots of the wooden packing. In order to position the stove inside a room, a good general rule is to lay the stove on the
floor gently, with maximum caution and avoiding any violent impact.
b.3 Positioning
For positioning the stove, we suggest you to choose a spot that is as central as possible to the area you wish to heat; this will
facilitate a uniform distribution of the heat and will help obtaining an optimum efficiency.
We recommend putting a floor-guarding plate close to the flue or to inflammable materials (such as parquet or carpeting).
For safety reasons, maintain a distance of at least 20cm between the hot
sides of the stove and possibly inflammable covering materials (such as
glass-beaded walls, wallpapers et cetera); otherwise, use specific
insulating materials, available on sale.
L=20 cm min. B=20 cm min. R=20 cm min.
10
Summary of Contents for HEBE
