ZANTIA ITACA, Use And Maintenance Manual

27

Mod. ITACA-TROIA rev 01

Introduction

translated from the original text

IT

IT

FR

FR

ES

ES

EN

EN

IT

IT

FR

FR

ES

ES

EN

EN

1  INTRODUCTION

Dear Customer,
Thank you for purchasing our boiler. We are sure to have sup-

plied you with a technically valid product. In fact our products 

have been designed and built pursuant to European standards 

of reference for construction products (EN303-5 heating boilers 

for solid fuels, manually and automatically stoked), with high 

quality materials and an in-depth experience in transformation 

processes. The products also respect the essential requirements 

of the Directive 2006/95/EC (Low-Voltage) and of the Directive 

2004/108/EC (Electromagnetic Compatibility).

Below we provide information on how to use the product prop-

erly and carry out ordinary maintenance.  We advise you to care-

fully read the instructions in this manual to get the most out of 

your product. This installation and use manual is an integral part 

of the product: make sure that it always accompanies the appli-

ance even when ownership is transferred.  Should the manual be 

lost, ask our area technical service for a copy or download it di-

rectly from our company website. 

Comply with all local, national and European standards when 

installing the appliance. 

In Italy, for installations of biomass systems lower than 35KW, re-

fer to the Ministerial Decree 37/08. Every qualified installer with 

the proper requisites must issue a conformity certificate of the in-

stalled system. (By system we mean Stove+Air intake).

Our authorised technical service is always available for any re-

quest.

1.1 

REVISIONS OF THE PUBLICATION 

The contents of this manual are of a strictly technical nature 

and property of Zantia. 

No part of this manual can be translated into another lan-

guage and/or adapted and/or reproduced, even partially, in 

any mechanical, electronic form and/or media, by photocop-

ies, registrations etc. without the prior written consent of Zan-

tia. 

The company reserves the right to make modifications to 

the product at any time without prior notice. The proprietary 

company protects its lawful rights. 

1.2 

HOW TO STORE THE MANUAL AND RE-

FER TO IT 

•  Take care of this manual and store it in an easily accessible 

place. 

•  In the event this manual is lost or destroyed, request a 

copy from your dealer or directly from the authorised 

Technical Assistance Service. It can also be downloaded 

from the company website. 

•  The “

bold text

” requires the utmost attention. 

•  “

The italic text

” is used to call your attention to other sec-

tions of this manual or for any additional clarifications. 

•  The "Note" gives the reader additional information on the 

topic.

1.3 

SYMBOLS

ATTENTION: 

Carefully read and understand the message 

it refers to, 

as failure to comply with it may 

damage the product seriously and put the 

user's safety at risk

. 

INFORMATION: 

Failure to comply with that prescribed en-

dangers use of the product. 



OPERATING SEQUENCES: 

Sequence of operations to be carried out 

and/or buttons to press to access menus or 

to perform adjustments. 

1.4 

SAFETY WARNINGS

ATTENTION!!! You can never be too cautious: 

before installing the appliance, read and ob-

serve these fundamental Rules:

•  Only authorised and qualified personnel can perform 

installation, electrical connection, inspections and 

maintenance.

•  Install the product according to local and national laws 

and standards in force in the area, region or country.

•  Due to the weight of the product, before installation make 

sure that the floor is capable of bearing its weight and pro-

vide suitable insulation if it consists of flammable material 

(e.g. wood, carpets and plastic).

•  To correctly use the product and the electronic equipment 

connected to it and to prevent accidents, always observe 

the indications provided in this manual.

•  Comply with all local, national and European standards 

when installing the device. 

•  Make sure that the electrical system and power sockets are 

suitable to withstand the maximum output of the boiler 

indicated on the plate; Plug the product into a 230v – 50Hz 

electrical socket; do not use adapters, multiple sockets or 

extension cables. Make sure that the electrical system is 

equipped with an earthing system and residual current 

device according to the standards in force.

•  For the installation of the boiler, current legal standards 

regarding flue gas exhaust must be respected. It is rec-

ommended to connect the product to the flue by means 

of a terminal which can be inspected. Remember to con-

tact an authorised, certified service centre for installation 

and periodic maintenance of the product to ascertain the 

draught efficiency of the flue, before and during the boil-

er's combustion phase.

•  Any type of tampering or unauthorised replacement with 

non-original parts of the product can be dangerous for 

the operator's safety and relieve the company from all civil 

and criminal liability.

•  While operating, many of the product's surfaces are very 

hot (door, handle, glass, flue gas outlet tubes, etc.). 

Avoid 

contact with these parts without suitable protective 

clothing, such as thermal protective gloves.