background image

5

Control and Use

Control

Temperature Regulator for 
Refrigerator:

«A» 

Allows to adjust the temperature inside the refrigera-
tor according to use and external conditions.

• Pos. 1 = Minimum cold.
• Pos. 6 = Maximum cold.
• Pos. 0 = Motor disconnected.

Interior light:

Comes on when opening the door of the refrigera-
ting compartment.
When changing the light bulb, first remove the pro-
tective cover «X» after pull out the screw “Y” .

Dinamic Refrigeration (DAC):

Its use is particularly suitable:

• In hot weather (ambient temperature of over 25º)

and when a lot of foodstuffs have just been stored.

• In damp atmospheres (if a lot of frost forms on the

back wall of the refrigerator cabinet or droplets of
water appear on the shelves).

To operate, press the switch.
The DAC Dynamic Refrigeration system improves
the performance of the fridge compartment as can be
seen by:
· Faster cooling
· A more uniform temperature distribution
NOTE: When the DAC is operating on, cold produc-
tion is heightened, so the refrigerator temperature
control must  be set   to             to avoid excessive
cold.

Inner Door Compartments Position

The door compartments can be pulled up and remo-
ved  and inserted at other positions as needed.

Shelves Position

The storage shelves can be adjusted to various
heights.

Vegetable Drawer

The drawer is suitable for storing fruit and
vegetables.
There is a separator inside the drawer that can be
placed in different positions to allow for the
subdivision best suited to personal needs.
The drawer incorporates a device with slits
(adjustable by means of a sliding lever), which
makes it possible to regulate the temperature in the
vegetable drawer(s).
Close the slots to obtain a warmer temperature and
greater humidity.
Open the slots (Pos. ON) to obtain a cooler tempera-
ture and less humidity.

X

Y

PR270

D338

PR271

ON

Summary of Contents for Fridge-freezer













Reviews: