5
The Control Panel
1 Programme Chart
This will help you to select the correct programme
for drying.
2 Low Temperature
Button
Pressing this button allows drying to be performed at
a lower temperature, for delicate items.
The corresponding pilot light comes on.
This option can also be used for time controlled
drying.
The dryer heats at 1400 W instead of 2200 W.
If the button is not pressed, drying is performed at
full power (2200 W).
This option
cannot
be selected with QUICK DRY
.
3 QUICK DRY Button
By depressing this button the drying time is reduced
in the following COTTON programmes:
•
EXTRA DRY
•
READY TO WEAR
•
STORE DRY
The corresponding pilot light comes on.
This option
cannot
be selected with LOW
TEMPERATURE function.
4 Buzzer OFF Button
A buzzer sounds by depressing the push buttons
during the anti-creasing phase, at the end of
programme and when the water reservoir is full.
Press this button when selecting the programme if
you wish to switch the buzzer off during the anti-
creasing phase. The corresponding light illuminates.
5 Start button
Press this button to start the dryer after having
selected the programme and the options.
The relevant light will stop flashing. If you have
chosen a delayed start, the machine will begin the
countdown.
If the door of the appliance or the small door at
the bottom is opened while the programme is
running, this button must be pressed again after
closing the door in order to restart the programme
from the point at which it was interrupted.
This button must be depressed also after a power
failure and after having re-inserted the water
reservoir, if it has been emptied in the middle of a
programme after lighting up of light
.
In both cases the light of the Start/Pause button
flashes to remind you that the start button needs to be
pressed again.
6 Programme Phase
Indicator Lights
These lights indicate the various phases of the
programme as they are being performed.
“Drying” light
This light indicates that the appliance is in the drying
phase.
“Cooling” light
This light indicates that the appliance is in the
cooling phase. At the end of drying, there is a
10 minute cooling phase to cool the laundr
y.
“End of programme” light
This light is on at the end of the cooling phase,
during the anti-creasing phase and at the end of the
programme.
1
2 3 4 5 6 7
125981701.qxp 4/1/2006 9:27 AM Page 5
