6
To cancel the delay time press the DELAY START
button until the display indicates
0’
. Then press the
START/PAUSE button again.
When the delay is cancelled, the display shows the
duration of the programme.
During the delayed start, it is not possible to change
the programme or the delay time that have been
selected. To do this, you must first switch off the
machine by setting the programme selector dial to
“0”. Select the new programme, the options and the
delayed start, then press the START/PAUSE button.
To cancel or change options that have been selected,
simply set the appliance to PAUSE. Once you
perform the desired operation, press once again the
START/PAUSE button.
If you wish to add more laundry while the machine is
performing the countdown, simply open the door.
When you close the door, press the START/PAUSE
button again to cause the countdown to be resumed.
7 DISPLAY
The display shows the following information:
• duration of selected programme
• delayed start
• end of programme
• incorrect option selection
• alarm code
•
Duration of selected programme
After you have selected the programme, its
duration (in hours and minutes) appears on the
display. It is calculated automatically on the basis
of the maximum load accepted for each type of
fabric and of the required degree of drying.
When the programme starts, the remaining time is
displayed every 5 minutes.
•
Delayed start
If you have selected a delay time by means of the
relevant button, the display shows it for 2 seconds;
then it shows the duration of the previously
selected programme.
1.20
The countdown is displayed every 30 minutes until it
displays “90 minutes” and then hour by hour.
•
End of programme
A
flashing zero
indicates the end of the
programme and it is displayed after the “anti-
creasing” phase.
•
Incorrect option selection
If you select an option that is not compatible with
the programme you have selected, the display
shows
Err
(error).
This code will reappear during the execution of the
programme if you press one of the option buttons or
turn the programme selector.
0
3
125992054.qxp 2005-08-29 06:21 Page 6
