Cleaning between the outer and inner door
glass
You can remove the glass from the oven door if you need to.
To remove the outer glass
1 Open the oven door so you can get at the two cross head screws on
the top of the door.
2 Loosen these screws using a pozidrive screwdriver.
3 You should hold the door glass securely in place with one hand, whilst
removing the screws completely, with the other hand. If you do not do
this, the door glass could fall forward.
4 Using both hands, gently tilt the top of the door glass towards you.
Lift it slightly to disengage the locators at the bottom of the door.
5 Clean the outer and inner glass using hot soapy water and mild
abrasives such as 'Cif'. DO NOT try to clean the foil which is inside the
door. The foil is there to keep the door cool, if it is damaged it will not
work.
6 Replace the glass by holding it in both hands and gently placing the
locators into the holes of the brackets at the bottom of the door and
make sure the screw location holes line up.
7 Hold the glass in place with one hand and replace the cross head
screws into the location holes, with the other hand.
8 Tighten the screws using a pozidrive screwdriver. Close the door.
Z C G 5 3 0 0
26
Care and cleaning
Please note that the door
glass on your product may
differ in type and shape from
that shown in the diagram.
Summary of Contents for ZCG5300
Page 1: ...ZCG5300 INSTRUCTION BOOKLET ...
Page 42: ...N O T E S 42 Z C G 5 3 0 0 311734600 ...
Page 43: ...43 N O T E S ...