Zanussi Electrolux ZEBF 249 W, Instruction Booklet

5

Warning

If using the appliance with the salad drawer
removed, please ensure the vent in the back wall of
the appliance is not obstructed.

D756

Positioning the inner shelves

The walls of the refrigerator have runners so that
shelves can be positioned as desired.

D040

Positioning the door shelves

The door shelves can be easily removed for
cleaning. Gently ease the shelf in the directions
shown.

Adjustment of the door shelves can be made to
accommodate varying heights of bottles and other
containers. Store light items such as small cartons
and jars on the door shelves. The bottle shelf can be
used for the storage of heavier bottles.

D758

Fresh food refrigeration

To obtain the best performance, do not store warm
food or evaporating liquids in the refrigerator; cover
or wrap the food, particularly if it has a strong flavour.

Do not cover the shelves with any protective
material, such as paper, cardboard or plastic, which
may obstruct the air circulation.

To help you use your refrigerator correctly, here are
some more useful hints:

Raw meat (beef, pork, lamb & poultry or chicken):
wrap in polythene bags and place on the glass shelf
above the salad drawers.

Meat can only be stored safely in this way for
one or two days at the most.

Fruit & vegetables: these should be thoroughly
cleaned and placed in the salad drawers.

Butter & cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or
polythene bags to exclude as much air as possible.

Milk bottles: these should have a cap and should be
stored in the bottle rack on the door.

16

Door reversal directions

1. Disconnect from the electricity supply.

2. Remove all loose items, including food, store food

in a cool place.

3. Gently lay the fridge/freezer on its back with the

top held away from the floor by 5-8 cm (2-3
inches) of packing;

4. Remove the feet (2-3)

5. Remove bottom hinge (1).

6. Remove the freezer door by releasing it from the

middle hinge (H).

7. Unscrew the middle hinge.

8. Slide out the fridge door from pin (G), unscrew

the latter and then screw it down into the hinge
provided on the opposite side, after having
removed the small plugs which should then be
fitted on the opposite side.

9. Refit the fridge door and replace the middle hinge

to the left hand side.

10.Replace the door and bottom hinge (1) on the

opposite side.

11.Refit the feet (2-3) on the opposite side.

Attention

After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a low setting.

G

H

I

I

I

Printed on recycled paper

D715 PIED/M

1

2

3