background image

10

Service and Spare Parts

Customer Care Department

For general enquiries concerning your 

Zanussi

Electrolux appliance or for further information on
Zanussi Electrolux products, please contact our
Customer Care Department by letter or telephone at
the address below or visit our website at

www.zanussi.co.uk

Customer Care Department

Zanussi Electrolux
55-77 High Street
Slough
Berkshire
SL1 1DZ
08705 727727 (*)

* calls to this number may be recorded for training
purposes.

In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact
your local Service Force Centre by telephoning:-

08705 929929

Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.

For the address of your local Service Force Centre
and further information about Service Force, please
visit the website at 

www.serviceforce.co.uk

Before calling out an engineer, please ensure you
have read the details under the heading ÒSomething
Not Working.Ó

When you contact the Service Force Centre you will
need to give the following details:

1.

Your name, address and post code

2.

Your telephone number

3.

Clear and concise details of the fault

4.

The model and serial number of the appliance
(found on the rating plate)

5.

The purchase date

Please note that a valid purchase receipt or
guarantee documentation is required for in-
guarantee service calls.

For Customer Service in Ireland please contact us at
the address below:

Zanussi Electrolux
Electrolux Group (Irl) Ltd
Long Mile Road 
Dublin 12
Republic of Ireland

Tel: + 353 1 4090751

Email: service.eid@electrolux.ie

Summary of Contents for ZEF 90 W

















Reviews: