Zanussi Electrolux ZRT 163W, Instruction Book

12

Ins

Ins

tr

tr

uctions f

uctions f

or the Ins

or the Ins

t

t

aller

aller

Model

Gross capacity (l)

Net capacity (l)

Width (mm)

Height (mm)

Depth (mm)

Energy consumption    (kWh/day)

(kWh/year)

Energy class, according to EU Standards

Rated current (A)

Noise Lc (dB)

Weight (kg)

ZRT 163W

Fresh food com.: 155

Fresh food com.: 152

550

850

612

0,422

154

A

0,55

38

33

Installing the appliance

Transportation, unpacking

The appliance and the interior fitting are protected for
transport.

Remove all packaging and any adhesive tape.

Any remnants of adhesive can be removed using
white spirit.

After transportation the appliance must not be
switched on for 2 hours. This is to allow the
refrigerant to settle.

Cleaning

Clean the accessories and the inside of the appliance
with warm water and bicarbonate of soda (5 ml 
to 0.5 litres of water). Rinse and dry thoroughly.

Do not use detergents, abrasive powders, highly
perfumed cleaning products, wax polishes or
cleaning products containing bleach or alcohol.

Location

The appliance should be positioned in a well
ventilated, dry room.

Energy use is affected by the ambient temperature.

The appliance should therefore:

not be installed next to radiators, cookers or
other sources of heat

only be installed at a location where the ambient
temperature corresponds to the climate
classification, for which the appliance is
designed.

The climate classification can be found on the
serial plate.

The following table shows which ambient
temperature is correct for each climate
classification:

Climate Classification

Ambient Temperature

SN

+10 to +32 °C

N

+16 to +32 °C

ST

+18 to +38 °C

Technical Specifications