8
Operating Sequence
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment
of
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 90°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 5 KG OF WHITE COTTON AT 90°C
Suppose you have 5 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.
1. Load the laundry
Open the door by carefully pulling on the door handle
outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment
and into the
compartment marked
if you have selected the
“prewash” option.
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer). Close the drawer gently.
3. Select the required programme
Turn the programme selector dial to the programme
.
The light “
Start / Pause
” starts to flash. The pilot lights
corresponding to the various phases making up the
programme come on.
4. Select
(spin reduction) or
(rinse hold) option
Press the option button repeatedly, to select the desired
option. The relevant light illuminates.
5. Select the required option
Select “
Prewash
”, “
Easy Iron
” or “
Half Load
” option
if required, the corresponding light illuminates.
35.292.994…ZWF 1012 W.qxd 14/11/06 13:00 Página 8
Ofrecido por www.electromanuales.com
