Zanussi 916098950, User Manual

7.

1

1

1

2

2

3

CLEANING THE HUMIDITY SENSOR

CAUTION! Risk of humidity sensor

damage. Do not use abrasive materials

or steel wool to clean the sensor.

To assure best drying results the appliance is

equipped with metal humidity sensor. It is placed

on the inner side of the door area.
Over usage time the surface of the sensor may get

dirty what deteriorates the drying performance.
We recommend to clean the sensor at least 3 or 4

times or if you observe the drop of drying

performance.
To clean you can use harder side of dish-washing

sponge and bit of vinegar or dish soap.
To clean the sensor:

1. Open the loading door.
2. Clean the surfaces of the humidity sensor

wiping off the metal surface several times.

CLEANING THE DRUM

WARNING! Disconnect the appliance

before you clean it.

Use a standard neutral soap detergent to clean the

inner surface of the drum and drum lifters. Dry the

cleaned surfaces with a soft cloth.

CAUTION! Do not use abrasive

materials or steel wool to clean the

drum.

CLEANING THE CONTROL PANEL AND

HOUSING
Use a standard neutral soap detergent to clean the

control panel and housing.
Use a moist cloth to clean. Dry the cleaned

surfaces with a soft cloth.

CAUTION! Do not use furniture

cleaning agents or cleaning agents

which can cause corrosion.

CLEANING THE AIRFLOW SLOTS
Use a vacuum cleaner to remove fluff from the

airflow slots.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

ERROR CODES
The appliance does not start or it stops during operation.
First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised

Service Centre.

15