6
1. WASHING POWDER DISPENSER
The dispenser is
provided with 3
compartments marked
with the following
symbols:
«Prewash» symbol shows the compartment for the
prewash detergent.
«Wash» symbol shows the compartment for the
washing detergent.
«smooth» symbol shows the compartment for the
smoothing additives.
2. ON/OFF LAMP
It lights when the appliance is operating.
3. “RINSE HOLD” BUTTON
(delicate fabrics only)
Pressing this button the water will hold up in the wash tub
at the end of the cycle. Press again to drain the water and
take out the clothes.
4. “1050/600”BUTTON
If your washing machine is provided with this push button,
press it to reduce the spinning speed from 1050 to 600 r.p.m.
5. 1/2 LOAD BUTTON
Pressing this button before starting the intense program
there will be one rinse less which leads to energy and water
saving.
6. TEMPERATURE SELECTOR
This control allows you to select the temperature of the
washing cycle in accordance with the kind of clothes to be
washed.
Turn the control until the required temperature coincides
with the marker.
On the program table you will find the most appropriate
temperature for each kind of washing. Selecting
✳
any
program can be run through with cold water. This will
ensure a saving in electricity consumption.
7. PROGRAM SELECTOR
To select the required program turn the control clockwise
until the marker on the top coincides with the number of the
required program (reference mark on the control panel). If
at any chance you pass by the required number NEVER
TURN THE CONTROL ANTICLOCKWISE just continue
clockwise until the required number is reached again.
DESCRIPTION OF THE CONTROLS
Control panel
