12
A: Built-in Electric Hob:
650mm clearance
B: Built-in Gas hob:
700mm clearance
C: Slot-in Electric Cooker:
685mm clearance
D: Slot-in Gas Cooker:
787mm clearance
Hob
Clearance Height
The cooker hood is designed to be fitted over a cooking
appliance at the clearance heights stated, providing the
maximum output of the appliance beneath does not
exceed the maximums quoted in the Technical
Specifications.
If the output of the appliance below the cooker hood
exceeds the maximum output quoted, please refer to
the cooker manufacturer’s installation instructions.
A clearance height of 650mm (25
1
/
2
”) is required when
installed above a built-in electric hob, or 700mm
(27
1
/
2
”) when installed above a built-in gas hob.
A clearance height of 685mm (27”) is required when
installed above a slot-in electric cooker, or 787mm
(30
1
/
2
”) when installed above a slot-in gas cooker.
When installed between adjoining wall cabinets, the wall
cabinets must not overhang the hob and the distance
between the underside of the cabinet and the worktop
must be 450mm. If the height of the wall cabinet is
less than 450mm, a gap of 50mm must be maintained
either side of the hob.
This cooker hood must not be installed above
a cooking appliance with a high level grill.
Fitting the Wall Brackets
1.
Draw vertical line on the wall from the centre of
the cooking appliance up to the ceiling, using a
spirit level and marking pen. This is to ensure the
correct vertical alignment of the appliance.
2.
Fix wall bracket (1) to the wall aligning its marked
centre across the vertical line. Ensure that the
distance between the lowest point of the hood and
cooking appliance beneath meet the clearance
requirement quoted above.
* Clearance Height as specified
