28
USE
Control panel
1
2
3 4 5 6
7
8
9
1 Programme chart
There is a programme guide in Spanish language
on the handle of the detergent dispenser drawer.
2 Spin speed selector dial
This dial has the following positions:
■
1000 = MAX to 300 = MIN
■
= no spin
For linen and cotton items you can select a spin
speed from 1000 to 300 rpm. For synthetics,
delicates and wool from 550 (MAX) to 300 rpm
(MIN). In the intermediate positions the machine
will spin at decreasing speeds.
3 On/Off button
Press this button to start the machine: the «pilot»
light will come on. The same button is used to
switch the machine off.
Before selecting a programme or changing an
ongoing programme the machine must be
switched off by depressing the same button.
4 Intensive rinse button
By depressing this button on programmes for
cotton and linen the machine will rinse with more
water.
To be used in areas where the water is very soft
or for people allergic to detergents or who have
very delicate skin.
5 Half load button
Select this button to reduce water consumption
on the rinse cycle when washing a smaller load
of cottons or linens (max. load size=2.25 kg).
6 Rinse hold button
Press this button to make the machine stop with
water in the drum after the synthetic or delicate
wash cycles.
This prevents any creasing which may take place
if the clothes are left damp in the drum. When it
is convenient for you to empty the machine,
simply press this button again so that the
machine can proceed to drain and spin, or turn
the dial to the drain programme "N".
7 Temperature selector dial
Turn this dial to select the washing temperature.
Position
= cold wash.
8 Operating pilot light
This light is on whilst the machine is operating
and goes out at the end of the programme.
9 Programme selector dial
To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer.
Summary of Contents for FL 1014 V1
Page 21: ...Z ...
