41
P
O
R
T
UGU
Ê
S
Important:
Before washing your first load of laundry, we recom-
mend that you run a cotton cycle at 60°C, with the
machine empty, in order to remove any manufactur-
ing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1 Place the laundry in the drum
Open the door and place
the laundry in the drum,
one item at a time, shak-
ing them out as much as
possible. Close the door.
2 Measure out the detergent
Pull out the dispenser
drawer until it stops.
Measure out the amount
of detergent recom-
mended by the manufac-
turer in a graduated cup
and pour it into the main
wash compartment
.
If you wish to carry out
the prewash, pour deter-
gent into the appropriate
compartment marked
.
3 Measure out the additives
If required, pour fabric
softener into the com-
partment marked
,
and bleach into the com-
partment marked
without exceeding the
«MAX» mark.
4 Select the required option
P0518
P0517
P0004
5 Select the temperature
Press the temperature
selector dial in to pop it
out and turn it to the re-
quired value.
6 Select the programme and start the
machine
Press the programme
selector dial in to pop it
out and then turn it
clockwise until the pro-
gramme coincides with
the marker.
Depress the ON/OFF
button: the operating
pilot light will come on
and the machine starts
operating.
7 At the end of the programme
The machine stops automatically, the operating light
goes out.
After a programme which stops with water in the drum
(button
pressed), the water must be emptied out
before opening the door.
Wait one or two minutes before opening the door to
give the electric locking mechanism time to release it.
Relase the ON/OFF button.
Remove the laundry.
Turn the drum by hand to make sure it is completely
empty, so as to avoid any forgotten items being dam-
aged in a subsequent wash (e.g. shrinking) or their
colour running into a load of whites.
Release any buttons which have been pressed.
Turn the water tap off and unplug the machine.
Leave the door ajar to air the machine.
P0413
P0129
B
P0999
90
°
Operating sequence
Summary of Contents for FLI 1003
Page 16: ...Z ...
