background image

20

THESE WARNINGS ARE PROVIDED IN THE
INTEREST OF SAFETY. YOU MUST READ
THEM CAREFULLY BEFORE INSTALLING OR
USING THE APPLIANCE. 

It is most important that this instruction book
should always be at hand for the user for
reference. Should the appliance be sold or
transferred to another owner, or should you move
house and leave the appliance, always ensure
that the book is left with the appliance in order that
the new owner can get to know the functioning of
the appliance and the relevant warnings. 

CHECK THE APPLIANCE UPON RECEPTION
AND SHOULD ANY DAMAGE BE OBSERVED
CALL YOUR DISTRIBUTER BEFORE YOU
MAKE IT WORK. 

Children must not be allowed to temper with
the controls or play with the product. 

The appliance is heavy. Care should be taken
when moving it. Do NOT hold yourself on the
controls. 

All packing and transit bolts must be removed
before use. 

Serious damage can occur to the product and
to property if this has not been adhered to. See
relevant section (unpacking) in the instruction
booklet. 

The washing machine must be unplugged
when removing the interior transit bolts. Do not
plug the appliance before finishing the removal
of the transit bolts and the fixing of the caps in
the holes where the security bolts were. 

If the appliance is to stand on a carpeted floor
make sure that there is space between the
carpet and the supporting feet of the appliance
for the air to circulate freely around.

Any electrical and/or  plumbing work required
to install this appliance should be carried out by
a qualified electrician and/or plumber or
competent person.

It is dangerous to alter the the specifications or
attempt to modify this product in any way.

Care must be taken to ensure that the
appliance dos not stand on the electrical supply
cable. 

Only wash fabrics which are designed to be
machine washed. If in doubt, consult the
manufacturer of that item.

Before washing ensure that all  pockets are
empty and buttons and zips are fastened. 

Any objects such as coins, safety pins, nails,
screws, stones or any other hard, sharp
material can cause extensive damage and
must not be placed into the appliance nor left in
the pockets.

Avoid washing frayed or torn articles and treat
stains such as paint, ink, rust, and grease
before washing. 

Garments which have been in contact with
volatile petroleum products should not be
machine washed. If volatile cleaning fluids are
used, care should be taken to ensure that the
garement is dry before placing in the washing
machine. 

Wash small items such as socks, laces,
washable belts , etc. in a washing bag or pillow
case as it is possible for such items to slip
down between the tub and the inner drum. 

Only wash the advised quantity of delicate
fabrics. Damage to the fabric can ensue if you
over-fill. Refer to the manufacturerÕs
recommendations of quantities.

Do not overload the appliance, see the relevant
WASHING PROGRAM section .

Pets have been known to climb into washing
machines. Please check your drum before use.

The glass door becomes very hot during the
wash cycle. Keep children away from the
appliance whilst it is in operation. 

Before opening the door look through the
ÒwindowÓ to check if the water has been
drained. Should there be water do not open
before draining. If in doubt read section
ÒINSTRUCTIONS FOR USEÓ.

Always unplug the appliance and turn off the
water after use.

Leave the porthole slightly ajar between
washes to preserve the door seal.

Unplug the appliance before cleaning.

This product must be serviced by an authorised
Service Centre, and only genuine spare parts
should be used. Do not try to repair the
appliance yourself. 

Repairs carried out by inexperienced persons
may cause injury or serious malfunctioning of
the machine. Contact your local Service
Centre. Always insist on genuine spare parts.

WARNINGS

Summary of Contents for FLS 421 C




















Reviews: