Zanussi HK654850XB, User Manual

 for 4 seconds.   comes on. Deactivate

the hob with  .
To deactivate the function: activate the hob
with  . Do not set any heat setting. Touch

 for 4 seconds.   comes on. Deactivate

the hob with  .
To override the function for only one
cooking time: activate the hob with  . 
comes on. Touch   for 4 seconds. Set the

heat setting in 10 seconds. You can

operate the hob. When you deactivate the
hob with   the function operates again.

6.10 OffSound Control

(Deactivating and activating the

sounds)

Deactivate the hob. Touch   for 3 seconds.

The display comes on and goes out. Touch

 for 3 seconds.   or   comes on. Touch

 of the timer to choose one of the

following:
•

 - the sounds are off

•

 - the sounds are on

To confirm your selection wait until the hob

deactivates automatically.

When the function is set to   you can hear

the sounds only when:
• you touch 

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control panel.

6.11 Power management

• Cooking zones are grouped according to

the location and number of the phases in

the hob. See the illustration.

• Each phase has a maximum electricity

loading of 3700 W.

• The function divides the power between

cooking zones connected to the same

phase.

• The function activates when the total

electricity loading of the cooking zones

connected to a single phase exceeds

3700 W.

• The function decreases the power to the

other cooking zones connected to the

same phase.

• The heat setting display of the reduced

zones alternates between the chosen

heat setting and the reduced heat setting.

After some time the heat setting display of

the reduced zones stays on the reduced

heat setting.

6.12 Hob²Hood

It is an advanced automatic function which

connects the hob to a special hood. Both the

hob and the hood have an infrared signal

communicator. Speed of the fan is defined

automatically on basis of mode setting and

temperature of the hottest cookware on the

hob. You can also operate the fan from the

hob manually.

For most of the hoods the

remote system is originally

deactivated. Activate it before

you use the function. For more

information refer to hood user

manual.

Operating the function automatically

To operate the function automatically set the

automatic mode to H1 – H6. The hood reacts

whenever you operate the hob. The hob

recognizes temperature of the cookware

automatically and adjusts the speed of the

fan.
Automatic modes

Automat‐

ic light

Boiling1) Frying2)

Mode H0

Off

Off

Off

12

ENGLISH