18
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
GB
Fitting the telescopic chimney
• To fit the upper section S first expand the two
side pieces slightly, hook them behind the
brackets 2 and close them together again
until they touch. Fix the upper section S to
the brackets 2 using four of the screws
provided in the bag of accessories (
fig. 8
).
• Fit the lower section I as above, between the
upper section S and the canopy C using two
of the screws provided in the bag of
accessories.
• Chimney with venting grilles: Snap the
venting grilles into position in the apertures
located on the chimney section, so that the
symbol
is turned upwards and the symbol
faces forwards. Also, when the hood is
used in recirculation mode, ensure that the
grilles are properly secured to the inside of
the recirculation spigot
R
(
fig.9
).
G
A18_
714_0
3
2
S
I
2
C
Fig. 8
Fig. 9
