Zanussi TCS 683 LT, Instruction Booklet

10

Drying sequence

Before starting up for the first time it is advisable
lo load a few moist cloths into the dryer and to let
it run for about 20 minutes. This ensures that no
dust and dirt is left in the drum.

Operation

1. Connect the appliance.
2. Load the laundry.
3. Close the door.
4. Select the desired drying time (in high or low 

temperature section, depending on the
laundry).

5. In case, press button 

.

6. Press button 

: the programme starts.

If the position 

on the dial is reached, the

heating is automatically cut off  and the laundry is
cooled.
After around 10 minutes, the programme is over.

Important: It is not advisable to open the door
during operation to check the degree of dryness.
As the laundry is warm, when touched it gives
the impression of still being damp, even if it is
dry. Open the door after the programme has
finished.
If the programme has to be interrupted, it is
advisable to perform the cooling phase to
prevent the heat from building up inside the
machine.

After drying

■

Switch off the appliance.

■

Clean the filter and empty water container
(see pages 11 and 12).

i

P0555

40

P0918