32
Operating sequence
Automatic washing and drying
(non-stop programme)
This option is only possible for cottons and
synthetics.
Maximum load:
– cotton, linen 2.25 kg
– synthetics
1.5
0
kg
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C,
with the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main
wash compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a
time, shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent
recommended by the manufacturer in a
graduated cup and pour it into the main wash
compartment .
If you wish to carry out the prewash, pour
detergent into the appropriate compartment
marked .
3. Measure out the additives
If required, pour fabric softener into the
compartment marked
, and bleach into the
compartment marked
without exceeding
the «MAX» mark.
4. Select the required option.
5. Select the temperature
Turn the dial to the required setting.
i
P0266
P0222
Cl
P0004
P0416
90
