background image

30

WARNINGS

It is most important that this instruction book should be 
retained with the appliance for future reference. Should the 
appliance be sold or transferred to another owner, or should 
you move house and leave the appliance, always ensure that the 
book is supplied with the appliance in order that the new owner 
can be acquainted with the functioning of the appliance and 
the relevant warnings.

These warnings are provided in the interest of safety. You must 
read them carefully before installing or using the appliance.

ª

This appliance is designed to be operated by 
adults. Children should not be allowed to tamper 
with the controls or play with the product.

ª

Any electrical work required to install this 
appliance should be carried out by a qualified 
electrician or competent person.

ª

This product should be serviced by an authorized 
Service Centre, and only genuine spare parts 
should be used.

ª

It is dangerous to alter the specifications or 
modify this product in any way.

ª

Care must be taken to ensure that the appliance 
does not stand on the electrical supply cable.

ª

The domestic refrigerators and freezers are 
designed to be used specifically for the storage of 
edible foodstuffs only.

ª

Frozen food must not be re-frozen once it has 
been thawed out.

ª

Manufacturers’ storage recommendations should 
be strictly adhered to. Refer to relevant 
instructions.

ª

There are working parts in this product which 
heat up. Always ensure that there is adequate 
ventilation as a failure to do this will result in 
component failure and possible food loss. See 
installation instructions.

ª

Parts which heat up should not be exposed. 
Wherever possible the back of the product should 
be against a wall.

ª

Before any cleaning or maintenance work is 
carried out, be sure to switch off and unplug the 
appliance.

ª

If the appliance has been transported 
horizontally, it is possible that the oil contained in 
the compressor flows in the refrigerant circuit. It 
is advisable to wait at least two hours before 
connecting the appliance to allow the oil to flow 
back in the compressor.

ª

The inner lining of the appliance consists of 
channels through which the refrigerant passes. If 
these should be punctured this would damage the 
appliance beyond repair and cause food loss.
DO NOT USE SHARP INSTRUMENTS to 
scrape off frost or ice. Frost may be removed by 
using the scraper provided. Under no 
circumstances should solid ice be forced off the 
liner. Solid ice should be allowed to thaw when 
defrosting the appliance. See defrost instructions.

ª

Do not place carbonated or fizzy drinks in the 
freezer as it creates pressure on the container, 
which may cause it to explode, resulting in 
damage to the appliance.

ª

This appliance is heavy. Care should be taken 
when moving it.

ª

Ice lollies can cause frost burns if consumed 
straight from the appliance.

ª

Under no circumstances should you attempt to 
repair the appliance yourself.
Repairs carried out by inexperienced persons 
may cause injury or more serious malfunctioning. 
Refer to your local Service Centre, and always 
insist on genuine spare parts.

ª

This appliance does not contain gasses which could damage 
the ozone layer, in either its refrigerant circuit or insulation 
materials; it must nevertheless be disposed of in a proper 
manner, in accordance with regulations for protection of the 
environment.

Summary of Contents for Z 18/8 K









Reviews: