background image

Contents

Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  2

Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  3

First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4

Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4

Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4

Care and Cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5

What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  6

Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  7

Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  7

Environmental concerns _ _ _ _ _ _ _ _ _ _ _ _ _  10

Subject to change without notice

 Safety information

In the interest of your safety and to ensure the correct use,

before installing and first using the appliance, read this

user manual carefully, including its hints and warnings.

To avoid unnecessary mistakes and accidents, it is im-

portant to ensure that all people using the appliance are

thoroughly familiar with its operation and safety features.

Save these instructions and make sure that they remain

with the appliance if it is moved or sold, so that everyone

using it through its life will be properly informed on ap-

pliance use and safety.

For the safety of life and property keep the precautions of

these user's instructions as the manufacturer is not re-

sponsible for damages caused by omission.

Children and vulnerable people safety

• This appliance is not intended for use by persons (in-

cluding children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowl-

edge, unless they have been given supervision or in-

struction concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that they do

not play with the appliance.

• Keep all packaging well away from children. There is

risk of suffocation.

• If you are discarding the appliance pull the plug out of

the socket, cut the connection cable (as close to the

appliance as you can) and remove the door to prevent

playing children to suffer electric shock or to close

themselves into it.

• If this appliance featuring magnetic door seals is to

replace an older appliance having a spring lock (latch)

on the door or lid, be sure to make that spring lock

unusable before you discard the old appliance. This

will prevent it from becoming a death trap for a child.

General safety

Caution!  Keep ventilation openings clear of

obstruction.

• The appliance is intended for keeping foodstuff and/or

beverages in a normal household as explained in this

instruction booklet.

• Do not use a mechanical device or any artificial means

to speed up the thawing process.

• Do not use other electrical appliances (such as ice

cream makers) inside of refrigerating appliances, un-

less they are approved for this purpose by the manu-

facturer.

• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is contained within

the refrigerant circuit of the appliance, a natural gas

with a high level of environmental compatibility, which

is nevertheless flammable.

During transportation and installation of the appliance,

be certain that none of the components of the refrig-

erant circuit become damaged.

If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition
– thoroughly ventilate the room in which the appli-

ance is situated

• It is dangerous to alter the specifications or modify this

product in any way. Any damage to the cord may cause

a short-circuit, fire and/or electric shock.

Warning!  Any electrical component (power cord,

plug, compressor) must be replaced by a certified

service agent or qualified service personnel.

1. Power cord must not be lengthened.
2. Make sure that the power plug is not squashed or

damaged by the back of the appliance. A squashed

2

 

Summary of Contents for ZBA7190A













Reviews: