Zanussi ZBA7190A, User Manual

Climate

class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Electrical connection

Before plugging in, ensure that the voltage and frequency

shown on the rating plate correspond to your domestic

power supply.

The appliance must be earthed. The power supply cable

plug is provided with a contact for this purpose. If the

domestic power supply socket is not earthed, connect the

appliance to a separate earth in compliance with current

regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above

safety precautions are not observed.

This appliance complies with the E.E.C. Directives.

Door reversibility

The door of the appliance

opens to the right. If you

want to open the door to the

left, do these steps before

you install the appliance:

• Loosen the upper pin

and remove the spacer.

• Remove the upper pin

and the door.

• Remove the door.
• Loosen the lower pin.

On the opposite side:
• Install the lower pin.
• Install the door.
• Tighten the spacer and

tighten the upper pin.

Ventilation requirements

The airflow behind the ap-

pliance must be sufficient.

50 mm

min.
200 cm

2

min.
200 cm

2

Installing the appliance

Caution!  Make sure that the mains cable can move

freely.

Do the following steps:

8