20
Electrical Connection
Technical Data
We strongly recommend that all operations
for the installation of your cooker be carried
out by QUALIFIED PERSONNEL to the
relevant British Standards.
The oven is designed to be connected to 240V (50Hz)
electricity supply.
The oven has an easily accessible terminal block
which is marked as follows:
Letter L
-
Live terminal
Letter N
-
Neutral terminal
-
Earth terminal
THIS APPLIANCE MUST BE EARTHED
The cable used to connect the oven to the electrical
supply must comply to the specifications given
below.
Models
Rating
Cable cross
Fuse
section mm
2
and
Type of the cable
min.
ZBF 760 2570 W
2,5 mm
2
Ho5 RR-F
13 A
For Europe use only
Models
Rating
Cable cross
Fuse
section mm
2
and
Type of the cable
min.
ZBF 760 2570 W
6 mm
2
6242 Y
15 A
For Uk use only
It is necessary that you install a double pole switch
between the appliance and the electricity supply
(mains), with a minimum gap of 3mm between the
switch contacts and of a type suitable for the required
load in compliance with the current rules.
The switch must not break the yellow and green earth
cable at any point.
Important
After installation and connecting, the cable must be
placed so that it cannot at any point reach a tempera-
ture of more than 50
°
C above the ambient temperatu-
re.
Before the appliance is connected, check that the
main fuse and the domestic installation can support
the load; and that the power supply is properly
earthed.
The manufacturer disclaims any responsibility should
these safety measures not be carried out.
DIMENSIONS
Height
580 mm.
OF RECESS
Width
560-570 mm.
Depth
550 mm.
DIMENSIONS
Height
320 mm.
OF THE
Width
420 mm.
OVEN CAVITY
Depth
390 mm.
Oven capacity
53.2 litres
Heating elements rating
Oven element
2.5 kW
Grill element
1.8 kW
Convenction Fan
30 W
Oven Light
15 W
Cooling Fan
25 W
Total Rating
2.570 kW
