Zanussi ZBF22451SV, User Manual

Problem

Possible cause

Solution

The door is left open.

Close the door. Refer to "Door

open alarm"

The temperature in the appli-

ance is too high.

Contact a qualified electrician or

contact the nearest Authorised

Service Centre.

A   or   symbol is shown

instead of numbers on the

Temperature Display.

Temperature sensor prob-

lem.

Contact the nearest Authorised

Service Centre (the cooling sys-

tem will continue to keep food

products cold, but temperature

adjustment will not be possible).

The compressor operates con-

tinually.

Temperature is set incorrect-

ly.

Refer to "Operation".

Many food products were

put in at the same time.

Wait some hours and then check

the temperature again.

The room temperature is too

high.

Refer to climate class chart on

the rating plate.

Food products placed in the

appliance were too warm.

Allow food products to cool to

room temperature before storing.

The door is not closed cor-

rectly.

Refer to "Closing the door".

The "QuickFreeze" is switch-

ed on.

Refer to "QuickFreeze function".

There is too much frost and

ice.

The door is not closed cor-

rectly or the gasket is de-

formed/dirty.

Refer to "Closing the door".

The compressor does not start

immediately after pressing the

"QuickFreeze", or after chang-

ing the temperature.

This is normal, no error has

occurred.

The compressor starts after a pe-

riod of time.

Water flows on the floor.

The melting water outlet is

not connected to the evapo-

rative tray above the com-

pressor.

Attach the melting water outlet to

the evaporative tray.

Temperature cannot be set.

The "QuickFreeze function"

is switched on.

Switch off "QuickFreeze func-

tion" manually, or wait until the

resets automatically to set the

temperature. Refer to "Quick-

Freeze function".

dEMo appears on the display.

The appliance is in demon-

stration mode.

Keep the OK pressed for approx-

imately 10 seconds until a long

sound is heard and display shuts

off for a short time.

9