Zanussi ZBHC8, User Manual And Installation Instruction

-03-

A.

 Ceiling fixed frame method

Installation schematic diagram:

 Installation Method

1.Install the fixed frame to the ceiling

Make the fixed frame.

Please use the materials that can bear 4.5kg to fix the surrounding part.

Sticks of 30*25mm are to be used for the fixed frame.

Inner size of the fixed frame: 220*212mm.

If there is no exhaust pipe to the outdoors, please install the hard 

exhaust pipe sized inner diameter 98.4mm firstly.

Screw hole 1

、

2

、

3

、

4 applicable 

for ceiling joist installation, 

suspended ceiling installation and 

window installation. 

2.Install the adaptor

Find out the screw place on the fixed frame, by cutting the paperboard along 

the dash line, according to below diagram.

Use three self-tapping screws(4*25mm) to fix the adaptor to the ceiling of the 

fixed box.

3.Install the main body

Put the main body face the guide slot of the adaptor directly, then push up the 

main body.

Please make sure that the main body jointed to the adaptor, then use four 

tapping screws(diameter 4*25mm) 

to fix the main body. 

Exhaut Pipe

Adaptor

Over 5cm

Main Body

Over 50cm to the wall

Front cover

Inspection opening

Self-tapping screws(4pcs)

Downdip 1-2

Adaptor

220mm

212mm

Fixed frame