Zanussi ZBHC8, User Manual And Installation Instruction

-05-

C.

 Window type method

D.

 Wall mounted type method

Front cover size:

 254mmX254mm

Window frame size: 

210mmX219mm

Main body thickness: 

160mm.

*Remark: Window type 

installation must be 

transverse installation.

Nails fixed hole

Main body fixed screw

1.Install at the place of the aluminum framed window or replace the exhaust fan in the 

   bathroom

2.Fix the window kit to the frame of the aluminum window( waterproof glue must be used 

   for waterproof)

3.After connecting the power cord, embed the main body into the hole with screws.

1. Applicable for the bathroom without ceiling.

2. Fix the wall kit to the wall, then embed the main body on the wall kit.

3. Set the exhaust pipe(4” inner diameter 100mm) to the glass of window, and fix it to the 

    adaptor with tape or metal clamp.

4. Applicable size of the main body: 254mmX254mm,

    Thickness of the main body: 160mm.

5.The minimum distance between the surrounding structures should be 50 cm.

≥20mm

≥20mm

Wall

Wall

The machine needs 

≥20mm from the wall 2 sides

The vent is under the 

stainless steel cover 

and cannot be covered