Ha
8 mm
K
11
Remove the
brackets and mark a
distance of 8 mm
from the outer edge
of the door where the
nail must be fitted (K).
Hb
12
Place the small
square on the guide
again and fix it with
the screws supplied.
Align the kitchen fur-
niture door and the
appliance door by ad-
justing the part Hb.
Hb
Hd
13
Press the part
(Hd) on the part (Hb).
Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is attached tightly
to the cabinet.
Important!
If the ambient temperature is low
(for example, in the Winter), the size of the
gasket decreases. The size of the gasket
increases when the ambient temperature
increases.
Environmental concerns
The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local council, your
household waste disposal service or the shop
where you purchased the product.
25
www.zanussi.com
Summary of Contents for ZBT20420SA
Page 53: ...53 www zanussi com ...
Page 54: ...54 www zanussi com ...
Page 55: ...55 www zanussi com ...