Zanussi ZBT6234, User Manual

1

2

Install the appliance in the

niche.

Push the appliance in the

direction of the arrows (1)

until the upper gap cover

stops against the kitchen

furniture. Make sure that

the distance between the

appliance and the cup-

board front-edge is 44 mm.

Push the appliance in the

direction of the arrows (2)

against the cupboard on

the opposite side of the

hinge. Make sure that the

clearance between the ap-

pliance and the cupboard

is 4 mm.

44mm

4mm

Adjust the appliance in the

niche.

The lower hinge cover (in

the accessories bag)

makes sure that the dis-

tance between the appli-

ance and the kitchen furni-

ture is correct.

Open the door. Put the low-

er hinge cover in position.

I

I

Attach the appliance to the

niche with 4 screws.

Push the sealing strip be-

tween the appliance and

the adjacent cabinet.

Remove the correct part

from the hinge cover (E).

Make sure to remove the

part DX, in the case of

right hinge, SX in oppo-

site case.

B

E

E

C

D

Attach the covers (C, D) to

the lugs and the hinge

holes.

Install the vent grille (B).

Attach the hinge covers

(E) to the hinge.

Ha

Hb

Hc

Hd

Disconnect the parts (Ha),

(Hb), (Hc) and (Hd).

ca. 50 mm

ca. 50 mm

21 mm

90°

21 mm

90°

Install the part (Ha) on the

inner side of the kitchen

furniture.

11