Zanussi ZBT6234, User Manual

7. Open the door. Make sure that the light comes on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets. Con-

tact the Service Center.

Technical data

Dimension of the recess

Height

1446 mm

Width

560 mm

Depth

550 mm

Rising Time

20 h

The technical information are situated in the rating plate

on the internal left side of the appliance and in the ener-

gy label.

Installation

Caution!  Read the "Safety Information" carefully

for your safety and correct operation of the

appliance before installing the appliance.

Positioning

Install this appliance at a location where the ambient tem-

perature corresponds to the climate class indicated on

the rating plate of the appliance:

Climate

class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Electrical connection

Before plugging in, ensure that the voltage and frequen-

cy shown on the rating plate correspond to your domes-

tic power supply.

The appliance must be earthed. The power supply cable

plug is provided with a contact for this purpose. If the

domestic power supply socket is not earthed, connect

the appliance to a separate earth in compliance with cur-

rent regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above

safety precautions are not observed.

This appliance complies with the E.E.C. Directives.

Door reversibility

The door of the appliance opens to the right. If you want

to open the door to the left, do these steps before you

install the appliance:

9