background image

36

Positioning the door shelves

To permit storage of food packages of various sizes,
the door shelves can be placed at different heights.

To make these adjustments proceed as follows:
Gradually pull the shelf in the direction of the arrows
until it comes free, then reposition as required.

D338

Movable shelves

The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.

For better use of space, the front half-shelves can lie
over the rear ones.

PR260

HINTS

Hints for refrigeration

Useful hints:

Meat (all types):

wrap in polythene bags and place

on the glass shelf above the vegetable drawer.

For safety, store in this way only one or two days
at the most.

Cooked foods, cold dishes, etc..:

these should be

covered and may be placed on any shelf.

Fruit and vegetables:

these should be thoroughly

cleaned and placed in the special drawer(s)
provided.

Butter and cheese:

these should be placed in

special airtight containers or wrapped in aluminium
foil or polythene bags to exclude as much air as
possible.

Milk bottles:

these should have a cap and should

be stored in the bottle rack on the door.

Bananas, potatoes, onions and garlic, if not
packed, must not be kept in the refrigerator.

Summary of Contents for ZC 245 RM










Reviews: