Zanussi ZCAN20FW1, User Manual

2. Remove any stored food, wrap it in several

layers of newspaper and put it in a cool place.

3. Remove the drain plug from the inside of the

appliance.

4. Leave the lid open.

5. Place a tray beneath the outer drain plug.

6. Pull out the outer drain plug.

7. Rotate the drain plug 180 degrees to let the

drain water flow into the tray.

Make sure the water does not spill out

of the tray.

8. Clean the interior and dry it thoroughly.

9. Switch on the appliance.

10. Set the temperature to MAX setting and close

the lid. Wait two or three hours before you

reload previously removed food into the

appliance.

11. Set the temperature to the desired setting.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

WHAT TO DO IF...

There are sounds which may occur during the operation of the appliance (e.g. bubbling,

whirring, cracking or clicking), which are normal.

Problem

Possible cause

Solution

The appliance does not oper-

ate.

The appliance is switched off.

Switch on the appliance.

The mains plug is not connec-

ted to the mains socket cor-

rectly.

Check if the appliance is plug-

ged correctly.

There is no voltage in the

mains socket.

Connect the appliance to a

different electrical mains sock-

et. Contact a qualified electri-

cian.

12