background image

1

WARNINGS

It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred, always ensure that the book is left with
the appliance in order that the new owner can get to know the functions of the appliance and
the relevant warnings. These warnings are provided in the interest of safety. You MUST read
them carefully before installing or using the appliance.

Installation

  This cooker must be installed by qualified

personnel, according to the manufacturer's
instructions.

  This cooker is heavy. Take care when moving it.

  Remove all packaging before using the cooker.

 

Prior to installation, ensure that the local
distribution conditions (nature of gas and
pressure) and the adjustement of the
appliance are compatible.

 

The adjustement conditions for this
appliance are stated on the label.

 

This appliance is not connected to a
combustion products evacuation device. It
shall be installed and connected in
accordance with current installation
regulations. Particular attention shall be
given to the relevant requirements regarding
ventilation.

 

This cooker is designed to be connected to
a 230V, 50Hz electrical supply.

  Ensure that the electrical supply complies with

the type stated on the rating plate.

  Do not attempt to modify the cooker in any way.

Child Safety

  This cooker is designed to be operated by

adults. Do not alow children to play near or
with the cooker.

  The cooker gets hot when it is in use and retain

their heat for a long period after use. Children
should be kept away until it has cooled.

  Children can also injure themselves by pulling

pans or pots off the cooker.

During use

  This cooker is intended for domestic cooking

only. It is not designed for commercial or
industrial purposes.

 

The use of a cooking appliance produces,
heat and humidity in the room in which it
is installed. Ensure good ventilation of the
room keeping natural ventilation openings
clear or installing a mechanic ventilating
device.

  Do not use this cooker if it is in contact with

water. Do not operate the cooker with wet
hands.

 

An intensive and prolonged use of the
cooker could necessitate a supplementary
airing by opening the window, or a more
effective ventilation by increasing the
mechanical device power, if there is.

 When using other electrical appliances,

ensure the cable does not come into contact
with the hot surfaces of the cooker.

  Never leave the cooker unattended when

cooking with oil and fats.

  Unstable or misshapen pans should not be

used on the hob burners as unstable pans
can cause an accident by tipping or spillage.

The grill pan will become hot during use,
always use oven gloves when removing or
replacing a hot grill pan.

During use the appliance becomes hot.
Care should be taken to avoid touching
heating elements inside the oven.

  Ensure the control knobs are in the ‘OFF’

position when not in use.

  This cooker should be kept clean at all times.

A build-up of fats or foodstuffs could result in
a fire.

 Only

 

clean this oven in accordance with the

instructions.

  Never use plastic dishes in the oven or on the

hob burners. Never line any part of the oven
with aluminium foil.

  Always ensure that the oven vent which is

located at the centre back of the hob is left
unobstructed to ensure ventilation of the oven
cavity.

  Perishable food, plastic items and aerosols

may be affected by heat and should not be
stored above the cooker.

  Never pule the appliance by the oven handle.

  The appliance is fitted with a lid: this is

designed as a dust cover when closed, and
as a splash back when open. Do not use for
any other purpose.

  Always remove any spillage from the surface

of the lid before opening, and the appliance
should be allowed  to cool before closing the lid.

 

After using the cooker, the lid MUST NOT be
closed until the hob and oven are completely
cold.

Service

 This cooker should only be repaired or

serviced by an authorised Service Engineer
and only genuine approved spare parts
should be used.

 Environmental Information

 After installation, please dispose of the

packaging with due regard to safety and the
environment.

  When disposing of an old appliance, make it

unusable, by cutting off the cable.

Summary of Contents for ZCC 5607






















Reviews: