background image

20

GUARANTEE CONDITIONS

Guarantee stipulated in the contract

2 years starting from setting into function the
manufacturer will replace the damaged parts
except the cases mentioned in chapter

Reserves

”.

Conditions for applying

For applying this guarantee you have to direct to
the distributor who sold you the appliance and
submit to him your Guarantee Certificate. The
dealer will or will not overtake the expenses for
the labor and transport in accordance with their
sales conditions.

Reserves:

We draw your attention on the fact that the
guarantee will not be applied:

  if the damages are due to shock , abnominal

power variation, etc., or non-observing of the
installation and use conditions stipulated in
the Instruction book, wrong handling,
negligence or wrong, installation non-
conforming to the rules imposed by the
power, gas distributor;

  if the user modified the material or took off

the marking or the serial numbers;

  if the person who made the repairing is not

certified by the manufacturer or the dealer;

  if the appliance was used for commercial or

industrial purpose or other household
purposes than what it was conceived for;

  if the appliance was bought or repaired

outside cantry territory.

AFTER SALES SERVICE

Any repair work that needs to be carried out
should be done with the utmost care and
attention. For this reason we recommend that for
any problem you contact the dealer who sold it
to you.

In case of moving to another place, closing of
the shop, contact the nearest Consumers
Service (Authorized Service Center) who will
give you the address of an After Sales Service.

In case of intervention on your appliance ask
your after sales service only spare parts
certified by the Manufacturer.

Summary of Contents for ZCC 5607






















Reviews: