13
•
Warning:
- Connect the power supply cable of suitable
dimensions before securing the power supply
unit.
- Assemble the runners on the sides of the
machine (using the screws supplied) as shown in
fig.1.
- Fasten the telescopic runner supports (RH and
LH) using three wood screws (fig.2) and taking
care to follow the measurements shown in fig.2.
- Make a slot in the bottom of the open
compartment following the measurements given
in fig.2.
- If the compartment does not have a shelf for the
machine to rest on, assemble the machine fixing
bracket (ref.29) as shown in fig.4. Place screw 1
in the slot of the bracket and adjust the position
before locking in place using screw 2.
- Fasten the power supply unit (fig.3) to the back
of the appliance in the top left-hand corner using
two wood screws as shown in fig.2.
Fig. 2
Fig. 1
